Updated Nov 20, 2026· 9 min read

Key takeaways

  • Compare bolt-on and scissor motorcycle center stands by fitment, lift method, capacity and clearance, with five listed picks for garage work and care.
⭐ Key Takeaways
Quick answer: Our top pick is TCMT Electric Center Stand for Harley Touring, with Dasen Heavy Duty Steel Center Stand for Harley Touring as a strong alternative.

A center stand holds a motorcycle upright with the rear wheel, or both wheels, clear of the floor. That simple change makes chain care, wheel removal, cleaning and winter storage far easier than working around a side stand lean. Many bikes leave the factory with one fitted, but plenty of cruisers and older models do not.

Aftermarket choice splits into two families. Bolt-on center stands attach to the frame and travel with the bike, deploying with a foot lever or, on some heavy touring models, an electric actuator. Scissor center stands stay in the garage, slide under a flat-bottomed frame or engine cradle, and lift the whole bike for service work. This guide covers five current Amazon-listed options across both families and the fitment checks that matter before ordering.

As an Amazon Associate, we earn from qualifying purchases.

Quick answer

Start with fitment, not lifting power. Bolt-on center stands are model specific, so the year, model, exhaust routing and ride height must all match the listing. Scissor center stands suit flat-bottomed bikes and need a rated capacity above the bike weight, plus enough lift range for the job. Measure clearance, confirm the mounting points, and choose the family that matches the work planned.

TCMT Electric Center Stand for Harley Touring

TCMT Electric Center Stand for Harley Touring

TCMT Electric Center Stand for Harley Touring

Check price on Amazon

The TCMT electric center stand is a bolt-on kit listed for Harley-Davidson Touring models from 2017 through 2025, including Electra Glide, Street Glide, Road Glide and Road King variants. Instead of a foot lever and body weight, a linear actuator raises and lowers two aluminum legs electronically, so a heavy loaded tourer can be parked upright without the usual heave onto a manual stand. Construction mixes metal, aluminum and stainless steel with a black finish, and the listing describes a bolt-on fitting process that takes minutes once the mounting points are clear.

The limits are firm. The stand cannot be used with cross-under exhaust pipes, because the pipe routing occupies the space the legs and actuator need. The listing also notes that no installation instructions are included, so fitting relies on the model service manual and careful reference to the frame mounting points. Electrical connection requirements, and clearance for saddlebags and footboards, also need confirming before ordering. For a compatible late-model tourer that is parked and serviced at home, the powered operation is the main attraction, removing the physical effort that puts many riders off adding a center stand at all.

Dasen Heavy Duty Steel Center Stand for Harley Touring

Dasen Heavy Duty Steel Center Stand for Harley Touring

Dasen Heavy Duty Steel Center Stand for Harley Touring

Check price on Amazon

The Dasen stand is the traditional manual counterpart for earlier Harley-Davidson Touring bikes. It is a heavy-duty steel bolt-on stand listed for FLH and FLT Touring models from 1980 through 2008 running standard ride height. Leg length is listed at five and seven-eighths inches, the lifting lever works from the left side, and the lever tucks discreetly below the passenger footboards once the bike is up. Mounting hardware is included, and the design lifts the rear wheel clear for cleaning, belt inspection and rear-end service.

Compatibility rules are strict, and the listing states them plainly. The stand does not fit 2009 and newer models, does not work on bikes with lowering kits, and does not work with cross-under exhaust systems. Screamin Eagle variants and other special editions also need individual checking rather than assumption. That narrow window is typical of bolt-on stands, because frame tabs, exhaust routing and suspension height all changed across generations. Owners of an eligible bike at stock height get a simple mechanical tool with no wiring. Owners outside the window should look at electric kits for newer tourers or at a scissor lift stand.

Orion Motor Tech Motorcycle Scissor Lift Center Stand

Orion Motor Tech Motorcycle Scissor Lift Center Stand

Orion Motor Tech Motorcycle Scissor Lift Center Stand

Check price on Amazon

The Orion Motor Tech unit represents the second family in this guide. Sold as a motorcycle lift and motorbike center stand, it is a steel scissor jack with a wide deck that slides under a flat-bottomed bike and lifts from the center. Rated capacity is 1,100 pounds, and the lift range runs from under four inches up to about thirteen and eight-tenths inches, which covers chain work, wheel removal and cleaning on suitable flat-bottomed machines. The package includes a T-handle and a three-eighths-inch socket for turning the screw, plus a chain brush, and a safety pin locks the raised height through a series of holes.

Because nothing bolts to the motorcycle, one stand can serve several bikes, which suits households with more than one machine. The trade-offs are that the bike must present a flat, strong lifting surface at least nine inches wide, ground clearance must stay within the stated limit, and the stand only works where the garage floor is hard and level. It is a service tool rather than a parking aid, so it does not help with upright parking away from home. For routine maintenance on a suitable bike, the wide deck and locking pin make a steady, simple setup.

VEVOR Motorcycle Lift 1200 lb Scissor Center Stand

VEVOR Motorcycle Lift 1200 lb Scissor Center Stand

VEVOR Motorcycle Lift 1200 lb Scissor Center Stand

Check price on Amazon

The VEVOR scissor center stand, model JL-M01101, raises the rated capacity to 1,200 pounds and widens the working range, lifting from about four and one-tenth inches to fifteen inches. A ratchet and crank drive the screw, the deck is wide with deepened anti-slip rubber striping, and a security pin locks the height through a six-hole pattern. The steel frame uses an X-shaped layout with a central axis, aimed at keeping the bike from shifting while raised. The listing positions it for street bikes, cruisers, touring motorcycles and ATVs, provided the underside is flat enough to take the deck safely.

That extra capacity and height suit heavier bikes and jobs needing more room underneath. Confirm the combined weight of bike, fuel and luggage stays under the rating, confirm the deck contacts frame rails or a reinforced cradle rather than a sump cover or exhaust pipe, and use the locking pin every time. Color and size variants exist in the same listing family, so check the model number and capacity of the chosen variant at checkout.

VIVOHOME 1100 LBS Motorcycle Lift Scissor Jack Center Stand

VIVOHOME 1100 LBS Motorcycle Lift Scissor Jack Center Stand

VIVOHOME 1100 LBS Motorcycle Lift Scissor Jack Center Stand

Check price on Amazon

The VIVOHOME scissor lift, model VH012, is another wide-deck center stand for the garage, rated at 1,100 pounds with a maximum lift height of fourteen and a half inches. The steel scissor frame is powder coated, the deck carries a textured rubber pad to limit slipping and scratching, and a hand crank drives the lift. The listing describes the stand for cruisers, dirt bikes and ATVs, and the low starting height helps it slide under bikes with modest clearance. No assembly beyond positioning is described, which keeps setup simple for occasional service work.

The VIVOHOME sits mid-range here on capacity and lift height, so deck size, underside condition and frequency of use decide the fit. Occasional chain and cleaning work on a midweight bike is well within this rating. Straps or a helper for balance during the first lifts are sensible practice, and the stand should rest on a level concrete floor with safety features engaged before work begins.

How to choose

Begin by deciding which family fits the actual need. A bolt-on stand travels with the bike, supports upright parking anywhere, and helps with roadside wheel or chain attention, but it only works when an exact fitment exists for that model and year. A scissor center stand stays in the garage, fits many flat-bottomed bikes, and gives better access for service work, but offers nothing away from home.

For a bolt-on stand, work through the fitment list in order. Confirm the model year range, then the exhaust routing, because cross-under pipes rule out several popular kits. Confirm ride height, since lowering kits change the leg length the stand was designed around. Confirm that footboards, saddlebag guards and aftermarket parts leave the lever or actuator path clear, and plan the install around the service manual when instructions are not included.

For a scissor stand, compare rated capacity with the wet weight of the heaviest bike it will lift, and leave a clear margin. Check the minimum height against ground clearance, and the maximum height against the work planned. Inspect the underside for a flat, load-bearing surface, and note any sump, exhaust or plastic panel that must not take weight. Deck width, rubber padding, a positive locking pin and a stable base all matter more than small differences in headline capacity.

Who should skip

Skip a bolt-on center stand when no listing names the exact model and year, when the bike runs a lowering kit or cross-under exhaust that the listing excludes, or when ground clearance is already tight on rough roads. Skip the electric kits when the bike electrical system is in poor shape or when a simple mechanical tool is preferred. Skip a scissor center stand when the bike has a fully faired or uneven underside with no safe lifting surface, when the garage floor is gravel or sloped, or when the real need is upright parking away from home. Riders who only need occasional rear-wheel lifting for chain care may find a paddock stand the smaller and simpler purchase.

FAQ

Does a center stand fit every motorcycle of the same brand?

No. Fitment runs by model and year range, and often by trim. Frame tabs, exhaust routing and suspension height change between generations, so a stand listed for one Touring generation may not fit the next. Always match the exact model, year and equipment notes in the listing before ordering.

Can a scissor center stand damage the underside of a bike?

It can if the deck presses on a sump cover, exhaust pipe or plastic panel instead of a load-bearing surface. The listings limit these stands to bikes with a flat bottom or an added flat support surface. Position the deck on frame rails or a reinforced cradle, and lift slowly while checking contact points.

Is an electric center stand hard to install?

The TCMT listing describes a bolt-on fitting and an actuator that raises and lowers the legs, but it also states that no installation instructions are included. A service manual for the exact model, the correct torque values and a check of the electrical connection are needed, and dealer fitting is a sensible option.

Which stand suits winter storage best?

Both families can take weight off the tires during long storage. A bolt-on stand keeps the bike upright on its own feet, while a scissor stand lifts the bike higher and can be removed once the bike is supported. Either way, store on a level floor, keep the stand locked, and check stability after the first day.

Final verdict

For a late-model Harley-Davidson tourer without cross-under pipes, the TCMT electric kit is the most convenient bolt-on route, while the Dasen steel stand serves earlier Touring bikes at stock height with simple mechanical operation. For service work across one or more flat-bottomed bikes, the Orion Motor Tech, VEVOR and VIVOHOME scissor center stands cover ascending capacity and lift needs, with the VEVOR offering the highest rating and range of the three. Match the family to the job first, then verify fitment or lifting surface in detail, and the chosen stand should make routine garage work noticeably easier.

A
affadmin
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Motorcycle Center Stands Buying Guide for Home GaragesCheck price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Prime for Young Adults

A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

See Prime for Young Adults
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.