Key takeaways
- Learn how to choose a motorcycle GPS mount that fits your bike, covering handlebar clamps, perch mounts and vibration control for clear navigation.
- Top Pick: RAM Mounts RAM-B-149ZU U-Bolt Mount
- Runner-up: RAM Mounts RAM-B-367U Handlebar Clamp Base
- Also consider: RAM Quick-Grip Large Phone Mount RAM-B-149Z-A-PD4U
A GPS or phone on a motorcycle is only useful if you can see it clearly at a glance, and that depends entirely on the mount. A mount that vibrates blurs the screen, a mount that slips lets the device droop, and a mount that blocks the instruments forces you to look away from the road. The right mount holds your navigation steady, in your line of sight, and secure at highway speed, so you can follow a route without taking your eyes off the road for more than a moment.
Mounts differ in where they attach and what they hold, and the best choice depends on your bike and your device. Handlebar clamps fit most bikes, perch mounts use the mirror or brake lever mount, and universal holders grip phones of different sizes. This guide compares five mounts and explains how to pick one that fits your bike, your device, and your riding style.
As an Amazon Associate, we earn from qualifying purchases.
Quick answer
For most riders, a RAM handlebar mount is the best starting point, because the parts are interchangeable and the clamp fits a wide range of bars. The RAM-B-149ZU U-bolt mount suits round bars, the RAM-B-367U clamp base suits bikes with a handlebar clamp bolt, and the Tackform perch mount suits riders who want a clean install. Add an X-Grip or Quick-Grip holder to carry a phone or GPS.
RAM Mounts RAM-B-149ZU U-Bolt Mount
The RAM-B-149ZU is a U-bolt handlebar mount that has been a standard choice for motorcycle navigation for years, and it remains one of the most versatile mounts available. It clamps to round handlebars and rails with a U-bolt that fits diameters from half an inch to an inch and a quarter, covering most motorcycle handlebars, as well as crash bars and luggage rails. The U-bolt design grips the bar firmly from two sides, so it resists the vibration and bumps that loosen single-point clamps.
The mount uses the RAM ball system, which is its main strength. A rubber ball on the base connects to a socket arm, which connects to a device holder, and each joint adjusts independently. That modular design means the rider can position a GPS or phone exactly where it is visible, then lock it in place, and can swap the holder later without replacing the base. The ball and socket also absorb vibration, which keeps the screen readable at speed. Note that the listing for this mount notes it as discontinued by the manufacturer, though it remains available through Amazon sellers, so check availability and consider the newer RAM bases if you want a current-production part.
RAM Mounts RAM-B-367U Handlebar Clamp Base
The RAM-B-367U is a handlebar clamp base that mounts to the existing handlebar clamp bolt, giving a clean install with no extra clamp on the bar. It replaces one of the bolts that holds the handlebar clamp to the triple tree, using a longer bolt with a ball on top, so the mount sits at the center of the bars where it is easy to see and does not crowd the grips, levers, or mirrors. That centered position is ideal for navigation, since the device sits in the rider’s natural line of sight.
The base uses the same RAM ball system as the U-bolt mount, so it connects to any RAM socket arm and device holder. That modularity means the rider can pair it with an X-Grip phone holder, a GPS cradle, or a tablet holder, and can adjust the position by loosening the socket arm. Check that your bike uses a standard handlebar clamp bolt size before ordering, since the base needs a matching bolt to install.
RAM Quick-Grip Large Phone Mount RAM-B-149Z-A-PD4U
The RAM Quick-Grip Large Phone Mount is a complete phone mounting kit that combines a U-bolt handlebar base with a spring-loaded phone holder, giving riders a ready-to-use navigation setup in one box. The holder grips large phones securely with spring-loaded arms and rubberized pads, so the phone stays put over bumps and at speed, and it releases with a simple squeeze when the rider wants to take the phone off the bike.
The Quick-Grip design is built for riders who use their phone as a GPS and want to mount and remove it quickly at every stop. The holder fits large phones, including those in slim cases, and the spring tension holds the phone firmly without pressing the side buttons. The rubber pads protect the phone from scratches and absorb vibration, which keeps the screen steady and readable. For a ready-to-ride phone mount, the Quick-Grip kit is a strong pick.
Tackform Chrome Motorcycle Perch Mount
The Tackform Chrome Motorcycle Perch Mount is a perch mount that clamps to the mirror or brake lever perch, giving a clean mounting point without using handlebar space. It fits the perch bolt on most motorcycles and holds a device on a ball mount that adjusts to the rider’s line of sight. The chrome finish matches cruiser and touring bikes, where a black clamp would look out of place, and the perch position keeps the device close to the rider’s hand for easy viewing.
The perch mount is useful on bikes where the handlebars are crowded with controls, cables, and mirrors, leaving no room for a bar clamp. By using the perch, it frees the bars and places the device at a natural viewing angle, just below the mirror. The mount is built from metal, so it resists vibration and holds its position at speed, and it works with Tackform holders and with other ball-mount holders that use the same size ball. Installation is simple, since it uses the existing perch bolt and needs no drilling or modification.
RAM X-Grip Large Phone Mount with Tough-Claw
The RAM X-Grip Large Phone Mount with Tough-Claw combines the popular X-Grip phone holder with a Tough-Claw base that clamps to tubes and rails without tools. The X-Grip holds a large phone with four spring-loaded arms that grip the corners, leaving the screen and buttons accessible, and it fits phones of different sizes, including those in cases. The Tough-Claw base clamps to handlebars, crash bars, and luggage rails from five eighths of an inch to an inch and a half in diameter, and it tightens by hand with a large knob.
The Tough-Claw is the standout feature, because it clamps and releases without tools, so the mount can move between bikes or between mounting points in seconds. That flexibility suits riders who own more than one bike, or who want to move the phone from the handlebar to a crash bar for a different view. The X-Grip holder is one of the most widely used phone holders on motorcycles, and its open design keeps the phone cool and the screen visible, though it offers less weather protection than a closed case.
How to choose
Start with your handlebar. Measure the bar diameter and check whether it is round or tapered, since U-bolt mounts fit round bars and some tapered bars need a different clamp. Check whether the handlebar clamp bolt is accessible, because a clamp-bolt base like the RAM-B-367U gives the cleanest install when it fits. If the bars are crowded, a perch mount that uses the mirror or brake lever perch frees up space and places the device in a natural viewing position.
Next, match the holder to your device. A dedicated GPS unit needs a cradle made for that model, while a phone needs a universal holder that fits its size with or without a case. Measure your phone with its case on, and check the holder range before buying, since a holder that is too small will not fit and one that is too large will not grip. Consider vibration, because a motorcycle shakes far more than a car, and a mount with a rubber ball and socket absorbs that vibration better than a rigid clamp. Finally, think about weather: an open holder is fine in dry weather, but a waterproof case is needed for rain.
Who should skip
Riders who never use navigation and ride only familiar roads should skip a GPS mount, since it adds clutter to the bars for no benefit. A phone in a pocket with voice directions through a headset is enough for occasional navigation, and a tank bag with a map pocket covers the rest.
Riders with a bike that has a factory navigation system built into the dash should also skip an aftermarket mount, since the factory system is already in the line of sight and integrated with the bike. Similarly, riders who only navigate in a car and never on a bike do not need a motorcycle mount. If you buy a mount, avoid cheap plastic clamps that flex under vibration, because they let the device droop and blur the screen. A mount is only useful if it holds the device steady and readable at speed.
FAQ
What size handlebar does a GPS mount fit?
Most U-bolt and clamp mounts fit round handlebars from half an inch to an inch and a quarter in diameter, which covers most motorcycles, while Tough-Claw style mounts fit tubes up to an inch and a half. Measure your bar diameter with calipers or a tape measure before buying, and check the mount specifications, since tapered bars and oversized cruiser bars may need a different clamp.
Will motorcycle vibration damage my phone?
Prolonged vibration can damage some phone cameras, particularly those with optical image stabilization, so a mount with vibration damping is worth having if you ride often with a phone mounted. A rubber ball mount absorbs much of the vibration, and a dedicated GPS unit is built to handle it. If you mount a phone daily, consider a vibration-damping mount or a dedicated GPS for long rides.
Can I mount a GPS on a cruiser with wide handlebars?
Yes, U-bolt mounts fit a wide range of bar diameters, and a perch mount is often a better choice on a cruiser, since it uses the mirror or brake lever perch and keeps the bars clear. Check the perch bolt size and the bar diameter before ordering, and prefer a metal mount over plastic for the extra vibration on a big twin engine.
Is a phone holder or a dedicated GPS better on a motorcycle?
A phone is better for most riders, because it is always with you, updates maps automatically, and runs the apps you already use. A dedicated GPS is better for long tours, off-road riding, and heavy rain, since it is waterproof, glove friendly, and built to survive vibration. Many riders use a phone for daily rides and a GPS for long trips, with a mount that swaps between the two.
Final verdict
For most riders, a RAM handlebar mount is the right starting point, and the RAM-B-149ZU U-bolt mount covers round bars while the RAM-B-367U clamp-bolt base gives the cleanest install when it fits your bike. Pair either base with the RAM Quick-Grip or the X-Grip holder to carry a phone, and add the Tough-Claw base if you want a tool-free mount that moves between bikes. Cruiser riders with crowded bars should look at the Tackform perch mount for a clean, chrome-matched install. Measure your bars, match the holder to your device, and choose a mount with vibration damping, so your navigation stays readable on every ride.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.






Write Your Review
No reviews yet. Be the first to share your experience!