Key takeaways
- Compare the best motorcycle tie down straps by width, length, break strength, working load and hook type, with cam, ratchet and retractable picks.
The best motorcycle tie down straps for most riders are wide ratchet or cam buckle straps with built-in soft loops, coated or locking hooks, and a published working load that comfortably covers the bike when the load is shared across four straps. A 1.5 inch strap with a working load near 1,000 pounds per strap, such as the PowerTye ratchet set below, suits heavy street bikes, while lighter 1 inch cam buckle sets suit dirt bikes and scooters.
This guide compares five strap sets sold for motorcycle hauling, grouped by buckle type and hook design rather than by headline strength alone. Each pick lists only published figures for length, width, break strength, working load, and hook type, so you can match the strap to your bike and your trailer anchor points before you buy.
As an Amazon Associate, we earn from qualifying purchases.
Table of Contents
- Quick answer
- How to choose motorcycle tie down straps
-
- PowerTye 1.5 Inch Ratchet Straps with Carabiner Hooks
-
- Rhino USA Motorcycle Tie Down Straps, Cam Buckle
-
- Keeper Ratchet Tie Down Straps Kit, 4 Pack
-
- Rhino USA Retractable Ratchet Straps, 2 Pack
-
- Pro Taper 1.5 Inch Tie Downs
- How many straps a motorcycle needs
- FAQ
- Conclusion
- Product and ASIN Reference
Quick answer
For a heavy street bike, choose the PowerTye ratchet pair for its 1,000 pound working load, carabiner hooks, and built-in soft loops. For a dirt bike, choose the Rhino USA cam buckle pair for fast pull-tight tensioning. For a full four-strap kit in one bag, choose the Keeper set. For tidy loading with no loose webbing, choose the Rhino USA retractable pair. For dirt bike bars with a swivel hook, choose the Pro Taper pair.
How to choose motorcycle tie down straps
Working load matters more than break strength
Break strength is the force at which a strap fails. Working load limit, often shortened to WLL, is the load the maker rates the strap to carry in normal use, and it is commonly one third of break strength. Add the working load of the straps holding the bike and keep that total above the weight of the machine.
Width spreads pressure
A 1 inch strap is common on budget kits and is adequate for light bikes when four straps are used. A 1.5 inch strap spreads pressure over a wider area, resists twisting, and is the safer default for heavy cruisers, baggers, and adventure bikes.
Hook type decides security and finish protection
Open S-hooks are simple and fast, but they can unhook if a strap goes slack over a bump. Coated S-hooks reduce scratching. Latch hooks and carabiner hooks close around the anchor point, so they stay attached even when tension dips, which makes them the stronger choice for long highway hauls. Soft loops wrap around handlebars, fork tubes, or frame rails so metal hardware never touches paint or chrome.
Ratchet, cam buckle, or retractable
Ratchet straps give the highest and most controlled tension and suit heavy bikes, but excess webbing must be secured so it does not flap. Cam buckle straps tension by pulling the free end, they are quicker to set and release, and they make it harder to over-tighten. Retractable ratchet straps wind the unused webbing into a housing, which keeps the setup tidy, at a lower published working load than full-size ratchets.
Length and anchor geometry
Measure from the bike attachment point down and outward to the trailer or truck bed anchor. Short 6 to 8 foot straps suit open trailers with close anchor points. Longer 10 to 15 foot straps suit pickup beds, enclosed trailers, and distant floor rings.
1. PowerTye 1.5 Inch Ratchet Straps with Carabiner Hooks
Tier: Premium
The PowerTye ratchet pair is the strongest pick in this guide on published working load, and it is built around closed carabiner hooks rather than open hooks. Each strap is 1.5 inches wide and 6.5 feet long, a size aimed at motorcycles, ATVs, and trailers where anchor points sit close to the bike. The maker publishes a working load limit of 1,000 pounds and a breaking strength of 3,000 pounds per strap.
A built-in Soft-Tye loop is sewn into each strap, so the webbing wraps around a handlebar, fork, or frame section and the carabiner clips to the loop or to the trailer anchor without metal resting on the finish. The set is sold as a pair with a storage bag. PowerTye states that these straps are made in the USA, and the webbing is nylon with triple stitching as published by the maker.
This is the pick for riders hauling a heavy street bike who want a closed hook at each end and the highest working load in the group. The trade-off is length: at 6.5 feet, these straps need anchor points within easy reach, so a wide pickup bed with distant rings may call for a longer set as a supplement.
Specs
- Strap size: 1.5 inch x 6.5 feet
- Working load limit: 1,000 lb
- Breaking strength: 3,000 lb
- Hook type: Carabiner hooks
- Soft loop: Built-in Soft-Tye loop
- Webbing: Nylon, triple stitching as published
- Pack: Pair, with storage bag
- Maker detail: Made in USA, model 30761-bag
2. Rhino USA Motorcycle Tie Down Straps, Cam Buckle
Tier: Mid-range
The Rhino USA cam buckle set is a pull-tight design for riders who prefer speed and simple release over ratchet leverage. The pair uses 1.5 inch by 8 foot polyester webbing with a steel cam buckle. The Amazon product information for this listing publishes a tensile strength of 3,328 pounds, and the maker describes coated full-bend S-hooks with safety clips, plus integrated soft loops.
The integrated soft loops are the practical highlight. They let the strap connect to handlebars, frames, and swing-arms without a separate loop strap, and they keep coated hooks away from paint. Because a cam buckle is tensioned by hand pull, it is well suited to dirt bikes and lighter street bikes where very high ratchet force is not needed and where avoiding over-compression of the front suspension is a concern.
This set suits frequent loading, such as a dirt bike hauled every weekend, where a fast setup matters. Riders moving a very heavy touring bike on a long highway route may prefer the ratchet control and closed hooks of the PowerTye pair instead.
Specs
- Strap size: 1.5 inch x 8 feet
- Tensile strength: 3,328 lb as published in product information
- Hook type: Coated full-bend S-hooks with safety clips
- Buckle type: Steel cam buckle
- Soft loop: Integrated soft loops
- Webbing: Polyester
- Pack: 2 pack, black
- Maker detail: Model CAMBUCKLES
3. Keeper Ratchet Tie Down Straps Kit, 4 Pack
Tier: Budget
The Keeper kit is the complete four-strap solution in this guide. It contains four ratchet straps, each 1 inch wide and 15 feet long, with a published break strength of 1,800 pounds and a working load of 600 pounds per strap as published for this kit. Four soft loops, four hook and loop straps for tidying webbing, and a storage bag are included.
The long 15 foot length is the main advantage. It reaches distant anchor points in a pickup bed or enclosed trailer without extensions, and the extra webbing can be held with the included hook and loop straps. The hooks are S-hooks with safety clips as described for the kit, and the webbing is polyester with alloy steel hardware as published.
This kit suits a rider who needs a full set for one bike, or who hauls different machines and wants spare straps in one bag. The 1 inch width and 600 pound working load per strap suit light and midweight bikes best when all four straps are used.
Specs
- Strap size: 1 inch x 15 feet
- Break strength: 1,800 lb
- Working load: 600 lb per strap as published for this kit
- Hook type: S-hooks with safety clips
- Buckle type: Ratchet
- Included: 4 straps, 4 soft loops, 4 hook and loop straps, storage bag
- Materials as published: Polyester webbing, alloy steel hardware
- Maker detail: Model 30059, 13 pieces
4. Rhino USA Retractable Ratchet Straps, 2 Pack
Tier: Premium
The Rhino USA retractable pair answers a different problem: loose webbing. Each strap is 1 inch wide and 10 feet long, and the unused length winds into the ratchet housing at the press of a button, so there is no tail to knot or tape. The listing publishes a break strength of 1,209 pounds and a load capacity of 403 pounds.
The product information lists coated full-bend S-hooks, an ergonomic padded handle, and an electro-plated zinc ratchet. Soft loop tie downs are included, so the set can still connect to handlebars and other parts where a hook should not rest directly.
Choose this pair for convenience and tidy loading on light to midweight bikes, scooters, and ATVs. The published working load is the lowest in this guide, so it is not the pick for a heavy touring motorcycle on its own. Pairing two sets to make four straps raises the combined working capacity.
Specs
- Strap size: 1 inch x 10 feet
- Break strength: 1,209 lb
- Load capacity: 403 lb as published
- Hook type: Coated full-bend S-hooks
- Buckle type: Self-retracting ratchet
- Included: 2 straps, soft loop tie downs, string bag as published for the 2 pack
- Handle: Ergonomic padded handle as published
- Maker detail: Model TD-RSRE1X10-2BLK
5. Pro Taper 1.5 Inch Tie Downs
Tier: Mid-range
The Pro Taper tie downs are a cam buckle pair shaped by dirt bike hauling. The nylon webbing is 1.5 inches wide and 84 inches long overall, which is 7 feet, and the design uses a swivel carabiner hook at the anchor end. The swivel base lets the hook align itself as tension is applied, which reduces webbing twist when the anchor point sits at an angle to the bike.
A built-in soft tie loop protects the handlebar area, and the maker publishes a load capacity of 1,200 pounds for the pair design. The straps are sold as a pair in black under model number 22819. The wide webbing and carabiner format make the set a natural front-end pair for a motocross or trail bike, where bars are the usual attachment point and a twisted strap is a common nuisance.
This pair suits dirt and dual-sport riders who load from the bars and want the hook to self-align. It is a two-strap set, so a rear pair is still needed for a complete four-point hold.
Specs
- Strap size: 1.5 inch x 84 inches (7 feet)
- Load capacity: 1,200 lb as published
- Hook type: Swivel carabiner hook, with soft tie loop
- Buckle type: Cam buckle
- Webbing: Nylon
- Pack: Pair, black
- Maker detail: Model 22819
How many straps a motorcycle needs
Four straps remain the sound default: two at the front and two at the rear. The front pair does most of the holding, pulling the bike forward and down so the front wheel stays planted against a wheel chock or the front of the bed. The rear pair stops the back of the bike moving sideways and keeps it from pivoting if a front strap loosens.
Attach the front straps to a strong, low point such as the lower triple clamp area, fork legs, or frame sections, using soft loops where metal hooks would mark the finish. Avoid routing straps over brake lines, cables, fairing edges, or sharp metal. Compress the front suspension partway, not to its limit, so the bike still has travel to absorb bumps without the hooks going slack. After the opening miles of a trip, stop in a safe place and check tension, hook seating, and webbing condition, then check again at fuel stops.
Keep straps clean, dry, and out of sunlight when stored, and retire any strap with cut webbing, frayed stitching, a bent hook, or a buckle that slips.
FAQ
How tight should motorcycle tie down straps be?
Tighten until the bike stands firmly and the front suspension is compressed partway, with no slack that lets the machine rock. Over-tightening can strain fork seals and bend light bars, so firm and even tension on both sides is the goal rather than maximum force.
Are cam buckle or ratchet straps better for a motorcycle?
Ratchet straps give higher, more controlled tension and suit heavy bikes and long highway hauls. Cam buckle straps are faster to set and release and suit dirt bikes and lighter machines, especially when you load often and want to limit how far the suspension is pulled down.
Can soft loops damage handlebars or paint?
Soft loops protect the finish by placing webbing, rather than a metal hook, against bars, forks, and frame parts. Keep the loop flat and free of grit, route it away from cables and brake lines, and check that it sits on a strong part of the bike before tensioning.
What working load should motorcycle tie down straps have?
Add the working load of all straps holding the bike and keep the total above the weight of the machine, with a margin for road forces. Many midweight bikes are held well by four straps rated near 500 to 600 pounds each, while heavier bikes benefit from wider straps rated near 1,000 pounds each at the front.
Conclusion
Match the strap to the bike and the trailer, not to the biggest number on the packet. The PowerTye ratchet pair leads this guide on working load and closed-hook security for heavy street bikes. The Rhino USA cam buckle pair and the Pro Taper pair give fast, bar-friendly setups for dirt and lighter machines. The Keeper kit is the one-bag four-strap answer for reach and value within its tier, and the Rhino USA retractable pair removes loose webbing for riders who load often. Whichever set you choose, use four straps, protect the finish with soft loops, and check tension early in every trip.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.

Write Your Review
No reviews yet. Be the first to share your experience!