Updated Nov 19, 2026· 10 min read

Key takeaways

  • Compare five motocross helmets with MIPS from Bell, Fox Racing and Troy Lee Designs, with published shell, certification, ventilation and weight specs.

The short answer: the Bell Moto-10 Spherical is the most advanced MIPS motocross helmet in this group, with a segmented carbon shell and a ball-and-socket version of MIPS, while the Bell MX-9 MIPS brings the same rotational-impact technology to a budget tier. Between those two poles sit the Fox Racing V3 RS, the Troy Lee Designs SE5 Composite and the Fox Racing V1 Core MIPS, each with a published MIPS system, current certifications and a distinct shell construction.

Every helmet below was chosen because its published listing specifications name a MIPS system outright. There are no non-MIPS helmets in this roundup, no borrowed specification figures, and no helmets included on reputation alone. Shell materials, certifications, ventilation counts and weights are taken from manufacturer and listing data only, and where a figure is not published for a given model, it is simply left out.

As an Amazon Associate, we earn from qualifying purchases.

Table of Contents

  • What MIPS does in a motocross helmet
  • How to choose a MIPS motocross helmet
  • Bell Moto-10 Spherical MIPS Helmet
  • Fox Racing V3 RS Helmet
  • Troy Lee Designs SE5 Composite Helmet
  • Fox Racing V1 Core MIPS Helmet
  • Bell MX-9 MIPS Dirt Helmet
  • Frequently asked questions
  • Conclusion
  • Product and ASIN Reference

What MIPS does in a motocross helmet

MIPS is a low-friction layer built inside the helmet, between the comfort padding and the energy-absorbing liner. In an angled impact, the layer allows a small amount of movement between the head and the helmet shell. That movement is designed to reduce the rotational motion that would otherwise be transferred to the head when a helmet strikes the ground at an angle, which is the typical shape of a motocross crash: a rider goes over the bars or lowsides, and the helmet digs in and twists rather than stopping dead in a straight line.

Manufacturers build MIPS into their helmets in different ways. Bell uses it in a conventional slip-plane form in the MX-9 MIPS and in a spherical, ball-and-socket form in the Moto-10, where the outer liner rotates around the inner liner. Fox Racing integrates its version, Mips Integra Split, across two layers of EPS foam in the V3 RS, and uses a standard low-friction layer in the V1 Core. Troy Lee Designs molds its MIPS Integra system directly into the liner of the SE5. The engineering differs, but the goal published by every one of these brands is the same: manage rotational energy as well as direct, straight-line impact energy.

How to choose a MIPS motocross helmet

Certification comes first. In the United States, a motocross helmet must meet the DOT standard, FMVSS 218. Many current helmets also carry ECE 22.06, the newer European standard with additional impact points and oblique-impact requirements, and Bell’s flagship adds Snell 2020 certification on top. A helmet carrying two or three of these marks has been built to satisfy more than one rulebook.

Shell material sets the tier. Carbon fiber shells, like those on the Moto-10 Spherical and the V3 RS, sit at the premium end. Fiberglass composite, used by the SE5 Composite, is the traditional mid-point. Polycarbonate and ABS shells, used by the V1 Core and the MX-9 MIPS, keep the budget end light enough for long days while still housing a full MIPS system.

Fit matters more than features. A motocross helmet should sit snug and even all the way around, with no pressure point on the forehead and no movement when you shake your head. Brands publish their size ranges and shell counts for a reason: a model built in more shell sizes, such as the V3 RS with five, can usually match a given head with less padding compression than a model built in fewer shells.

Weight and airflow decide long motos. Published weights in this group run from around 1,300 grams to around 1,600 grams in a size medium, depending on shell material and certification version. Vent counts vary just as widely, from the nine intake vents of the V1 Core to the much larger port layout of the premium helmets. Riders in hot climates should weigh airflow heavily; riders at high altitude or in cool conditions may not need it.

Bell Moto-10 Spherical MIPS Helmet

The Moto-10 Spherical is Bell’s flagship off-road helmet and the most technically ambitious design in this roundup. Its shell is built from segmented 3K carbon fiber, and its impact system, Spherical Technology powered by MIPS, uses a ball-and-socket arrangement in which the outer liner can rotate around the inner liner during a crash. Bell describes this as redirecting impact forces away from the head without compromising ventilation, weight or comfort.

Supporting hardware is equally thorough. The Thermal Exchange Airflow System moves air through the helmet, the Flying Bridge visor is fully adjustable and carries intake vents of its own, and the Magnefusion cheek pads use magnets so they can be removed quickly by medical staff after a crash. No Missed Races bumpers, made from softer EPP at the lower edges of the helmet, are designed to compress under load and reduce the chance of collarbone injury when the helmet edge contacts the body. A padded, lined helmet bag is included, and the Fasthouse DITD listing used for this roundup is the extra-small size of a range running from XS to 2XL.

Specs

  • Shell: Segmented 3K carbon fiber
  • Impact management: Spherical Technology, powered by MIPS
  • Certifications: DOT, Snell 2020 and ECE, as published by Bell
  • Weight: 1600 g, plus or minus 50 g, size medium in DOT and Snell form; 1390 g, plus or minus 50 g, size medium in ECE form
  • Ventilation: Thermal Exchange Airflow System
  • Extras: Magnefusion emergency-release cheek pads, Flying Bridge visor, No Missed Races EPP bumpers, padded helmet bag included
  • Tier: Premium

Fox Racing V3 RS Helmet

The V3 RS is the most technologically advanced motocross helmet in the Fox Racing line. Its 4K carbon fiber shell houses the Mips Integra Split system, which combines two layers of EPS foam and is designed to reduce rotational forces in a crash. Fox builds the V3 RS in five shell and five EPS sizes, a wider spread than most helmets in this group, which gives more riders a shell that matches their head without relying on thick padding to fill the gap.

The visor uses the MVRS magnetic release system, designed to detach in a crash rather than lever against the helmet. Fox also routes provision for a hydration system through the helmet and carves recesses for communication speakers, features aimed at off-road and endurance riders as much as pure motocross racers. The liner is an Ionic+ moisture-wicking design, and the whole helmet meets both DOT and ECE 22.06 standards. The listing used here is the matte black medium.

Specs

  • Shell: 4K carbon fiber
  • Impact management: Mips Integra Split, combining two layers of EPS
  • Certifications: DOT and ECE 22.06
  • Fit system: Five shell and five EPS sizes
  • Visor: MVRS magnetic visor release system
  • Extras: Hydration routing, speaker recesses, Ionic+ moisture-wicking liner
  • Tier: Premium

Troy Lee Designs SE5 Composite Helmet

The SE5 is the helmet Troy Lee Designs builds for its fastest racers, and the composite version wraps that race program in an aerospace fiberglass composite shell. Inside, an in-molded MIPS Integra rotational impact system works with a dual-density EPS liner, while the chin bar is lined with EPP and shaped with a collarbone suspension system intended to reduce the load passed to the collarbone area in a fall.

Troy Lee Designs publishes a weight of 1470 grams for the composite SE5, across three shell sizes covering XS through 2XL. Ventilation is handled by a multi-port layout with a chin-bar intake, and the cheek pads are quick-release 3D designs paired with a washable comfort liner, so the interior can be removed and cleaned between race weekends. The listing used for this roundup is the Saber Fog graphic in size small, and the model is certified to DOT and ECE 22.06 standards.

Specs

  • Shell: Aerospace fiberglass composite
  • Impact management: In-molded MIPS Integra rotational impact system
  • Certifications: DOT and ECE 22.06
  • Weight: 1470 g, as published for the composite version
  • Liner: Dual-density EPS with an EPP chin bar and collarbone suspension system
  • Fit system: Three shell sizes, XS to 2XL
  • Extras: Quick-release 3D cheek pads, washable comfort liner
  • Tier: Mid-range

Fox Racing V1 Core MIPS Helmet

The V1 Core is the entry point to the Fox Racing helmet range, and it keeps the two features that matter most: a MIPS low-friction layer and the MVRS magnetic visor release system found on the premium V3 line. The shell is an injection-molded polycarbonate and ABS construction, built to disperse energy across the helmet rather than concentrate it at the impact point.

Airflow comes from nine intake vents and four exhaust vents, and Fox builds the V1 Core in four shell and five EPS sizes, which is a generous spread for this tier and helps smaller and larger heads find a proper fit. The listing used here is the matte black version, and the helmet is DOT certified for use in the United States. For riders who want genuine MIPS protection and a magnetic visor release without moving into carbon-shell territory, this is the natural middle step in the Fox range.

Specs

  • Shell: Polycarbonate and ABS
  • Impact management: MIPS low-friction layer
  • Certifications: DOT, as published in the listing data
  • Ventilation: Nine intake vents and four exhaust vents
  • Fit system: Four shell and five EPS sizes
  • Visor: MVRS magnetic visor release system
  • Tier: Mid-range

Bell MX-9 MIPS Dirt Helmet

The MX-9 MIPS is the budget benchmark for rotational protection in motocross. Its lightweight polycarbonate and ABS shell carries a full MIPS energy management system, the same core technology found in Bell’s premium helmets, and the model has been a staple of the entry-level market for years because it pairs that system with a proper set of certifications and a five-year warranty from the manufacturer.

Cooling comes from the Velocity Flow Ventilation system, working with a fully adjustable Flying Bridge visor that has air intake vents of its own. The interior is removable and washable, and Bell builds the helmet in three shell and EPS sizes so the fit scales across the size range. The listing used for this roundup is the Disrupt graphic in matte black and orange, with a published item weight of 3.75 pounds. For new riders, or for anyone who wants a spare helmet with real rotational protection, the MX-9 MIPS remains the value reference point in this category.

Specs

  • Shell: Polycarbonate and ABS
  • Impact management: MIPS energy management system
  • Certifications: DOT, meeting the FMVSS 218 standard
  • Weight: 3.75 lb, as published in the listing data
  • Ventilation: Velocity Flow Ventilation system with a Flying Bridge visor
  • Fit system: Three shell and EPS sizes
  • Extras: Removable, washable interior
  • Tier: Budget

Frequently asked questions

What does MIPS add over a regular motocross helmet?

A regular helmet is built mainly to manage direct, straight-line impacts through its foam liner. MIPS adds a low-friction layer inside the helmet that allows a small amount of movement between the head and the shell in an angled impact, which is designed to reduce the rotational motion transferred to the head. Angled impacts are the common pattern in motocross falls, so the technology addresses the crash shape riders actually have.

Are more certifications always better?

Not automatically, but each mark means the helmet was built to satisfy a different rulebook. DOT FMVSS 218 is the legal baseline in the United States. ECE 22.06 adds more impact points and oblique-impact requirements, and Snell 2020 is a voluntary standard with its own demanding protocol. A helmet carrying two or three of these has passed a wider range of published requirements than one carrying a single mark.

How tight should a new motocross helmet feel?

Snug and even, with firm contact all the way around and no single pressure point. Cheek pads should press noticeably against your cheeks when the helmet is new, because the foam relaxes slightly with use. If the helmet moves when you shake your head, or lifts when you pull up on the chin bar, it is too large regardless of what the size label says.

When should a motocross helmet be replaced?

After any crash in which the helmet struck the ground with force, because the foam liner manages energy by deforming and does not recover its original structure. Manufacturers also recommend replacement after several years of regular use, as sweat, sunlight and cleaning products age the materials. If a helmet has taken a hit, the safe move is to retire it even when the shell shows no visible damage.

Conclusion

MIPS has moved from a premium talking point to a feature available at every level of the motocross market, and this group of five proves it. The Bell Moto-10 Spherical and the Fox Racing V3 RS deliver carbon shells and the most advanced published versions of the technology for racers who want everything a manufacturer offers. The Troy Lee Designs SE5 Composite brings a race-bred composite shell and an in-molded MIPS Integra system to the mid-range, the Fox Racing V1 Core pairs MIPS with a magnetic visor release at an accessible tier, and the Bell MX-9 MIPS remains the budget reference. Choose by certification, shell material and fit first, and the right helmet in this list will follow from those three decisions.

Check price on Amazon

Check price on Amazon

Check price on Amazon

Check price on Amazon

A
affadmin
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Motocross Helmets With MIPS: 5 Picks for…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Prime for Young Adults

A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

See Prime for Young Adults
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.