Updated Nov 18, 2026· 11 min read

Key takeaways

  • Compare the best motorcycle knee guards by CE rating, shell design, hinge type and fit, from hinged hard-shell guards to soft strap-on picks for riders.

The best motorcycle knee guards for most riders are the Leatt Dual Axis Knee & Shin Guards, because the anatomically correct dual-pivot design tracks natural knee movement while a hard shell and 3DF impact foam deliver CE-certified coverage over both the knee and the shin. Riders who want the highest foam-based impact rating should look at the EVS TP199, which carries a CE Level 2 rating in a low-profile, under-pants fit. The Alpinestars SX-1 V2 suits riders who want a lightweight polymer guard with a slim boot-friendly profile, the Alpinestars Bionic Plus is the soft, ventilated option for commuting and dual-sport use, and the Scoyco K37 covers the budget end with an adjustable TPU shell. All five picks are dedicated motorcycle knee guards compared on published manufacturer specifications.

As an Amazon Associate, we earn from qualifying purchases.

Table of Contents

How to Choose Motorcycle Knee Guards

Start by separating knee guards from knee braces. A knee guard protects against impacts and abrasion with a shell, foam padding, or both. A knee brace adds rigid frames and hinges designed to limit hyperextension and lateral movement, and it belongs to a different product category with different sizing and fitting requirements. This roundup covers guards only, so every pick below focuses on impact coverage rather than joint stabilization.

Next, check the CE rating. Motorcycle limb protectors are certified to EN 1621-1, and the standard has two performance levels. Level 1 allows a higher average transmitted force through the protector, while Level 2 requires the protector to absorb more energy and transmit less force to the leg. A Level 2 rating, like the one carried by the EVS TP199, is the stronger published result. Level 1 guards, such as the Leatt Dual Axis and both Alpinestars models, remain the common standard for this product type and are usually lighter and less bulky.

Construction decides how a guard feels over a full ride. Hard-shell guards use a rigid outer plate, usually polypropylene or high-density polyethylene, over impact foam. They deflect sliding contact and roost well, and hinged versions like the Dual Axis add pivots on each side so the shell follows the knee as it bends. Soft guards skip the rigid plate and rely on foam alone, which makes them slimmer under jeans but gives up the sliding surface of a shell. Reactive foams sit between the two: they stay flexible while riding and stiffen at the moment of impact.

Coverage matters as much as material. Knee-only guards protect the kneecap and are easy to wear under street clothes. Knee-and-shin guards extend the plate down the shin, which helps off-road, where footpeg contact and flying debris are routine, and on any bike where the shin meets hard parts in a fall. Longer guards need a slimmer lower profile so the shin plate can tuck into a boot top without pushing against it.

Fit is the last filter. Most brands size by thigh and calf circumference measured a few inches above and below the knee, and the guard should stay in place without the straps being overtightened. Strap-on designs adjust quickly over pants, while sleeve-and-strap hybrids hold position better on long rides. If a guard migrates while walking around the house, it will migrate on the bike too.

1. Leatt Dual Axis Knee & Shin Guard

Tier: Premium

The Leatt Dual Axis is the reference design in this category: a hard-shell knee and shin guard with a pivot on each side of the knee, arranged to copy the natural motion of the joint. Because the shell is anatomically shaped for the left and right leg rather than mirrored from one mold, the guard stays centered as the leg bends, and the slim profile slides into the top of a motocross or adventure boot.

Protection comes from a high-density polyethylene shell over Leatt’s ventilated 3DF impact foam. Leatt CE tests and certifies the guard as impact protection for the knee and shin to EN 1621-1 Level 1, and the company assigns the model its maximum total protection score of 25 points. The shell also carries an abrasion certification, which matters for street and dual-sport riders who may slide on pavement rather than dirt.

At a published weight of 850 grams per pair, the Dual Axis is light for a hinged hard-shell guard, and the foam is washable for riders who use the guards daily. Three sizes cover most adult legs. This is the pick for riders who want the most complete guard coverage in the roundup and are willing to wear a strap-on hard shell over riding pants.

Specs:

  • Brand and model: Leatt Dual Axis Knee & Shin Guard (5017010181)
  • Variant listed: Black, size L/XL
  • Shell: High-density polyethylene (HDPE) hard shell
  • Impact material: 3DF ventilated impact foam
  • Hinge: Dual pivots, anatomically correct for left and right legs
  • Certification: CE EN 1621-1 Level 1, knee and shin
  • Leatt protection score: 25 points
  • Weight: 850 g per pair (published)
  • Sizes: S/M, L/XL, XXL
  • Sold as: Pair

2. EVS TP199 Knee/Shin Guard

Tier: Premium

The EVS TP199 takes the opposite approach to the Leatt: no rigid outer shell and no hinge, but the strongest foam rating in this roundup. Developed with input from Travis Pastrana, the TP199 uses EVS Reactive Memory Foam, a material that stays soft and pliable while riding and stiffens when it takes a hit. EVS rates the guard to CE 1621-1 Level 2, the higher of the two impact levels in the standard.

The knee cup is molded bio-foam, and a flexible poly shin plate extends coverage down the leg in a low-profile shape designed to fit under riding pants. An inner circular gel knee donut helps keep the pad centered, and the breathable mesh backing manages heat on long rides. The compression-style fit is aimed at riders who find hard-shell guards bulky but still want certified protection for motocross, trail and street use.

Sizing runs from youth through 2X-Large in the wider TP199 line, and the variant in the reference table is the adult Black L/XL. Riders who split time between dirt and pavement and want one guard that disappears under gear will find the TP199 the easiest of the five to live with.

Specs:

  • Brand and model: EVS Sports TP199 Knee/Shin Guard (TP199K-BK-L/XL)
  • Variant listed: Black, size L/XL
  • Impact material: Reactive Memory Foam (RMF)
  • Knee cup: Molded bio-foam with gel knee donut
  • Shin coverage: Flexible poly shin plate
  • Certification: CE EN 1621-1 Level 2
  • Backing: Breathable mesh
  • Fit style: Low-profile compression fit, worn under pants
  • Sizes: S/M, L/XL, 2X-Large (adult line)
  • Sold as: Pair

3. Alpinestars SX-1 V2 Knee Protector

Check price on Amazon

Tier: Mid-range

The SX-1 V2 is Alpinestars’ lightweight hard-plate guard for off-road and dual-sport riding. The protector plates are made from a high-performance polymeric material blend and are strategically perforated, so the guard ventilates through the plate itself rather than relying only on gaps between panels. Foam backing behind the plates handles comfort and secondary absorption.

Alpinestars certifies the SX-1 V2 to CE EN 1621-1:2012 Level 1. The frame is semi-rigid and slim, which helps the lower section sit inside tall boots, and the sizing note published for this model is useful in practice: the L/XL and 2XL sizes share the same plastics, with only the strap length differing, so riders between sizes can choose by strap reach rather than plate size.

Dual straps with hook-and-loop closures hold the guard in place, and the thermoformed shin section extends coverage below the knee without the bulk of a full motocross guard. For riders who want a hard-plate guard that works as well on a dual-sport commute as on a trail weekend, the SX-1 V2 is the balanced middle option here.

Specs:

  • Brand and model: Alpinestars SX-1 V2 Knee Protector (6506321)
  • Plate material: High-performance polymeric blend, perforated
  • Certification: CE EN 1621-1:2012 Level 1
  • Frame: Semi-rigid, slim profile for boot compatibility
  • Closure: Dual hook-and-loop straps
  • Shin coverage: Extended thermoformed shin plate
  • Sizes: S/M, L/XL, 2XL
  • Note: L/XL and 2XL share the same plastics; strap length differs
  • Sold as: Pair

4. Alpinestars Bionic Plus Knee Protector

Tier: Mid-range

The Bionic Plus is the soft option in the Alpinestars line: an ergonomically profiled foam protector held in place by a dual strap closure system, with no rigid outer plate. The protector is CE certified to Level 1, and the chassis mixes 3D mesh with vented panels specifically to prevent heat build-up, which makes this the most commuter-friendly guard in the roundup for warm climates and stop-and-go traffic.

The asymmetric, pre-shaped design follows the natural curve of the knee, and the slim build fits under most riding jeans and textile pants. Because there is no hard shell, the Bionic Plus gives up the sliding and deflection surface of the SX-1 V2 and the Dual Axis, and in exchange it is lighter, quieter and easier to wear for a full day that mixes riding with walking.

Adult sizes are S/M and L/XL, and a separate youth version exists in the same line. Riders who have been skipping leg protection because hard guards feel excessive will find the Bionic Plus the easiest guard here to adopt as a daily habit.

Specs:

  • Brand and model: Alpinestars Bionic Plus Knee Protector (6506219-10-L/XL)
  • Variant listed: Black, size L/XL
  • Construction: Soft foam protector, no rigid shell
  • Certification: CE Level 1
  • Closure: Dual strap closure system
  • Ventilation: 3D mesh and vented panels
  • Product dimensions: 16 x 7 x 4.2 inches (published)
  • Sizes: S/M, L/XL
  • Sold as: Pair

5. Scoyco K37 Knee and Shin Guards

Tier: Budget

The Scoyco K37 covers the budget end of the roundup with a straightforward formula: a thermoplastic polyurethane shell over padding, adjustable straps, and one-size sizing. The shell covers the knee and extends down the shin, and the published brand size chart lists a guard length of 17.3 inches for the one-size fit, which is generous coverage for a guard in this tier.

Scoyco sells the K37 through its own Amazon storefront, and the listing positions the guard for motocross and road riding. The TPU shell is harder and more abrasion-tolerant than the plain polypropylene used on many budget guards, and the strap system allows the fit to be tuned at the thigh and calf rather than relying on elastic alone.

The trade-offs are the expected ones at this level: Scoyco does not publish a CE certification for the K37 in its Amazon listing data, and one-size guards rarely fit the extremes of the size range as well as the sized guards above. For new riders building a first gear set, or as a spare pair, the K37 delivers the essential coverage at the lowest commitment in the group.

Specs:

  • Brand and model: Scoyco K37 Knee and Shin Guards (K37-BC-ONE)
  • Shell: Thermoplastic polyurethane (TPU)
  • Closure: Adjustable straps
  • Size: One size; published guard length 17.3 inches
  • Product dimensions: 7.09 x 10.63 x 17.72 inches (published)
  • Coverage: Knee and shin
  • Seller: Scoyco Amazon storefront
  • Sold as: Pair

Frequently Asked Questions

Are knee guards a substitute for a knee brace?

No. A knee guard is impact protection: it absorbs and spreads the force of a hit through foam, a shell, or both. A knee brace is a framed medical-style device designed to limit hyperextension and side-to-side movement of the joint. The two products solve different problems, and riders recovering from a knee injury should follow medical advice rather than treating any guard in this roundup as joint support.

What is the difference between CE Level 1 and CE Level 2 knee guards?

Both levels are certified to the same EN 1621-1 standard, but Level 2 protectors must transmit less impact force to the body in the certification test, which means they absorb more energy. Level 2 guards, like the EVS TP199 here, are often thicker or use reactive foams to reach the higher rating. Level 1 remains the most common rating for motorcycle knee guards and is the level carried by the Leatt and Alpinestars models in this roundup.

Can motorcycle knee guards be worn under jeans or riding pants?

Yes, and low-profile models are designed for exactly that. Soft and reactive-foam guards such as the EVS TP199 and the Alpinestars Bionic Plus sit flat enough to fit under most jeans and textile pants. Hinged hard-shell guards like the Leatt Dual Axis are bulkier and are usually worn over off-road pants or under loose-fitting adventure gear, with the shin section tucked into the boot.

How tight should knee guard straps be?

Straps should be snug enough that the guard does not rotate or slide when the knee bends and straightens, but not so tight that they leave deep marks or restrict circulation. A practical check is to fit the guard, then walk, squat and swing a leg over the bike several times. If the knee cup stays centered over the kneecap through all of that, the fit is right; if it drifts, go up or down a size using the brand’s thigh and calf measurements.

Conclusion

Knee protection is the most commonly skipped layer in a riding kit, and it is also one of the simplest to add. Riders who want maximum coverage should choose the Leatt Dual Axis, with its hinged hard shell and certified knee and shin protection. Riders who prioritize the highest impact rating in the slimmest shape should choose the EVS TP199 and its CE Level 2 reactive foam. The Alpinestars SX-1 V2 splits the difference with a perforated polymer plate, the Bionic Plus keeps things soft and ventilated for daily riding, and the Scoyco K37 makes a sensible first or spare pair. Whichever design fits a rider’s pants, boots and budget is the one most likely to be worn on every ride, and that consistency is worth more than any single specification.

A
affadmin
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Motorcycle Knee Guards: 5 CE-Rated Picks for…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Prime for Young Adults

A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

See Prime for Young Adults
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.